ON ALL ITEMS WITH LOAD AND BREAKING STRENGTH STANDARD

• DO NOT EXCEED THE WORKING LOAD LIMIT. 

• WEAR NECESSARY PROTECTIONS SUCH AS SAFETY GLASSES, HELMET, GLOVES...ETC. TO PREVENT ANY INJURY.

•  ALWAYS FOLLOW STATE, FEDERAL AND INDUSTRY REGULATIONS WHEN USING THE PRODUCTS

 

TIE DOWN STRAPS

• Do not exceed the Working Load Limit.

• Inspect before each use, check for deformation or any form of crack or deformation which cause the strength of the product to be changed. If strap webbing is cut, frayed, worn, or damaged, replace the product immediately. Webbing should not be repaid. 

• Check Tie Down and Cargo every 25 miles. Do not use for lifting, towing or hanging purposes.

• Wear necessary protections such as safety glasses, helmet, gloves...etc. To prevent any injury.

• Follow state, federal and industry regulations when securing the loads.

CHAINS 

• Do not exceed the Working Load Limit.

• Do not use for lifting.

• Inspect before each use, check for deformation or any form of crack or deformation which cause the strength of the product to be changed.

• Check Chain and Cargo every 25 miles. 

• Wear necessary protections such as safety glasses, helmet, gloves...etc. To prevent ant injury.

• Follow state, federal and industry regulations when securing the loads. 

 LOAD BINDERS 

• Do not exceed the Working Load Limit.

• Do not use for lifting.

• Inspect before each use, check for deformation or any form of crack or deformation which cause the strength of the product to be changed.

• Check Binders and Cargo every 25 miles.

• Do not use for lifting 

• Wear necessary protections such as safety glasses, helmet, gloves...etc. to prevent any injury.

• Follow state, federal and industry regulations when securing the loads

RUBBER STRAPS 

• Inspect before each use, check for deformation or any form of crack or deformation which cause the strength of the product to be changed.

• Check Rubber Straps and Cargo every 25 miles. 

• Do not use for lifting.

• Do not overstretch. Over 50% of original length may lead to failure of the cord which may cause injury.

• Follow state, federal and industry regulations when securing the loads. 

• The sudden release can cause serious injury 

• Safe working range 2x length 

• Wear safety glasses

• Do not use damage straps

• Do not attach hook by the tip

• Comply with ALL safety warnings